Foldable Magnetic Wine Box for Single Bottle

Sometimes a paper wine bag is not enough. You need a rigid box that still folds flat for freight. This one has a magnetic closure and a PP handle, built on greyboard and faced with textured specialty paper. It suits wine retailers, corporate gifting, and promotional work. The foldable design cuts storage and freight volume by up to 70%, and the contrasting color scheme gives it shelf presence. Your logo can be printed on the front, and the integrated lining means the bottle sits in a finished interior, not a bare box. It's a premium alternative to a standard wine bag.

Foldable rigid build. When erected, the greyboard structure keeps the box firm. When flat, it cuts volume by up to 70% for warehousing and freight because it folds down.
Magnetic closure with PP handle. The lid shuts cleanly because the magnet holds it. With the attached handle, you can carry a single bottle to a dinner or an event without juggling it.
Contrasting color design. It's part of the structure itself, not added later. Print your logo on the front face, right on the two-tone exterior.
Integrated lining included. The interior lining comes built into the box, so the bottle stays protected and the presentation never varies.
Safe for transport. The cardboard is rigid, so it stacks safely, and when you ship flat, the foldable design means you get fewer damaged corners overall.

Get a Quote for this bag More wine boxes and box-and-bag sets

Specifications

Category: Cardboard wine box
Bottles: 1

Customisation

You have room to make it yours. Print your logo on the front face, change the exterior paper to match brand colors, or swap the interior lining for a different texture or color. And the box size adjusts too, to fit a specific bottle if the standard one is too tight or too loose. Tuning the magnetic closure strength isn't a problem, whether you want a firmer or softer snap. The PP handle can go another way, like a ribbon replacement, or nothing at all if you'd rather have a cleaner look.

How it's built

At its core, the box uses greyboard, which is standard for us. We don't use recycled greyboard or high-moisture paper in this product. But the facing is a textured specialty paper, and it's chosen for a tactile finish that reads as premium without being fragile. So the magnetic closure, built into the lid and base, makes opening and closing feel smooth, every single time.

Here's where the structure matters most: the foldable design. When it's flat, the box takes up only a fraction of its erected volume. That becomes real money if you're importing a container of gift boxes or storing them in a retail back room. And note this: the PP handle attaches to the box body, not glued to the lid, so it carries the bottle's weight without stressing the closure at all.

Bottle fit

The box suits one standard wine bottle. The integrated lining holds the bottle at the base and shoulder, so it can't slide around inside. For inserts, our rule is strict: the bottle must be held at four points, with no unsupported neck or shoulder. To check it, we shake a loaded box for 10 seconds, we tilt it 45 degrees, and we invert it completely. If the bottle moves at all, that box doesn't ship. Control tolerance suits the purpose: for the insert it's plus or minus 1 mm, and for the box body it's plus or minus 2 mm. That fits a standard bottle without forcing it, while a slightly smaller bottle won't rattle around in transit.

Best for

Think retail wine sales first, where a single bottle needs to look like a ready-made gift. And corporate gifting works well too, particularly if you need a branded box that folds flat until the moment you need it. Beyond that, promotional events, wine club shipments, and holiday single-bottle packs are all sensible applications. But it won't suit odd-shaped bottles like very tall Rieslings or heavy sparkling bottles with a wide punt. It's never the right call if your bottle falls outside standard dimensions. Just send us a bottle sample, and we'll verify fit before you pay for any tooling.

Buyer questions

Does this box fit a standard 750ml wine bottle?

Yes. A standard 750ml bottle works with this box. The integrated lining holds it at four separate points, and our fit check involves shaking the loaded box, then tilting it, and then inverting it completely. Bottles that are unusually tall or that have a wide punt aren't going to work with the standard box. Send us a bottle sample, and we'll adjust every dimension around what actually folds, protects, and ships.

How much space do I save by shipping these flat?

Look at it this way: because the box folds, its shipping volume comes down by up to 70% compared to one shipped erected. Right away that means lower freight costs per unit. It also means you need less warehouse space to hold the same inventory. Assembly on your end takes just a few seconds per box, and that's the trade-off that forgives the flat pack.

Can I get my logo printed on this box?

Yes. Logo printing is what the front face is designed for. We'll work with your Pantone colors and send a first-article sample for your sign-off before production runs. If the standard contrast doesn't treat your brand right, we recolor it to your own palette, or we can keep the standard contrast if it suits your brand.